Log in

No account? Create an account
Started to finish the wheel last night; despite tempering the center… - Doug Ayen's Blacksmithing Blog — LiveJournal [entries|archive|friends|userinfo]
Doug Ayen

[ userinfo | livejournal userinfo ]
[ archive | journal archive ]

[Nov. 11th, 2004|11:47 am]
Doug Ayen
[mood |working]

Started to finish the wheel last night; despite tempering the center of the wheel is hard enough to eat drill bits. I went to go grab my propane torch in order to heat it up enough to temper it more, discovered that the auto-light feature had stopped working. Started to go out to the workshop to go use the oxy-acetelyne torch, but it was FREAKING COLD. Decided I'll just stop off on the way home and pick up a new torch head.

Still, it was kinda fun, hitting the right speed and feed to start drilling the hardened steel, then seeing the coolant/drilling oil I was using start burning off from the friction. Pulled out the bit, and there was a nice groove burnished into the cutting faces of the drill -- I'm going to have to fix that before I use it again. Fortunately, I have a drill-Dr, which does a halfway decent job of such things. I know people who can do it by hand, but my toolgrinding skillz just aren't that 1337.

Did my final handle design, and picked out the wood I want to use. Camphor burl, looks pretty, smells like Vicks Vapo-rub. I'm going to try to get this thing finished over the next couple of evenings and over the weekend. Might even be able to break it in on a pizza on Saturday/Sunday if I get the carving right the first time.

I also started this years Xmas gifts, bunch of simple knives forged from the last of the 3/8" D2 stock. I think I'm going to go ahead and order more of this stuff, it's fun to play with, fairly rust resistant when heat-treated, and damn tough and hard. I'll probably call Carpenter Direct and order a few bars of 3/8", 1/2", and 1" for general use.


[User Picture]From: garnet_rattler
2004-11-27 05:08 am (UTC)

Just chiming in to encourage you to continue

Both the general smithing and background and the site reviews are good. I'm not in a position to do much with it right now, but the various sites and resources are of considerable interest to me for a wide assortment of things. A lot of these sites have stuff usefull in many other areas as well as for blacksmithing. So please carry on with the lot ...

(Reply) (Thread)